Meet Inspiring Speakers and Experts at our 3000+ Global Conference Series Events with over 1000+ Conferences, 1000+ Symposiums
and 1000+ Workshops on Medical, Pharma, Engineering, Science, Technology and Business.

Explore and learn more about Conference Series : World's leading Event Organizer

Back

Seiki Chiba

Seiki Chiba

Chiba Science Institute, Japan

Title: Progress and Current Status of Electroactive Polymer Transducers

Biography

Biography: Seiki Chiba

Abstract

Soft transducers made of synthetic or natural materials, capable of converting physical or chemical energy into mechanical work in response to various environmental stimuli such as salt, pH, humidity, heat, solvent, light, magnetic or, electric field, and light, have been gaining attention for biomimetic actuators. Some of the transducers have also been shown to operate in reverse as a generator. This lecture discusses electroactive polymer (EAP) transducers (see Figure 1). EAP can be generally classified into two categories: Wet (ionic) and electronic (electronic field responsive). Wet polymers use electrically driven mass transport of ions or electrically charged species to effect a change in the shape (or vice versa). Electronic polymers use an electric field to effect a shape change by acting directly on charges within the polymer (or vice versa). Each type of electroactive polymer has advantages and disadvantages for particular applications. Wet polymers typically can exert relatively high pressures and can be driven by low voltages. However, they are relatively slow and limited in size (since they are dependent on molecular transport), require high current and relatively energy inefficient. They can operate best over a narrow range of temperatures and must often be kept moist. In contrast, electronic polymers can be fast, efficient, and relatively insensitive to temperature and humidity fluctuations. These polymers can operate at relatively high voltages and low currents, which usually requires additional voltage conversion components but makes the size and capacity of wires and interconnects lighter and less critical. A type of field-activated EAP transducer that embodies the desirable properties of polymer is dielectric elastomers (DEs). DEs show considerable promise for harvesting energy from wind, ocean waves, water currents, or even from human motion.

Figure 1: Typical Electroactive Polymers (EAPs)

Recent Publications :

 

  1. S Chiba, M Waki, R Kornbluh and R Pelrine (2011) Current status and future prospects of power generators using dielectric elastomers. Smart Materials and Structure. 20(12):124006.
  2. S Chiba et al. (2017) Simple and robust direct drive wave power generation system using dielectric elastomers. Journal of Materials Science and Engineering B. ISSN 2161-6221